Ortofon OM Pro S Installation: A Comprehensive Guide
Installing a new turntable can be an exciting yet daunting task. One of the most sought-after turntables in the market is the Ortofon OM Pro S. Known for its exceptional sound quality and build, it’s no wonder why many audiophiles are eager to set it up in their listening rooms. In this guide, we’ll walk you through the process of installing the Ortofon OM Pro S, ensuring that you get the most out of your investment.
Unboxing and Inspection
Upon receiving your Ortofon OM Pro S, it’s essential to inspect the package for any damage. Once you’ve confirmed that everything is in good condition, carefully remove the turntable from its packaging. The OM Pro S comes with the following components:
Component | Description |
---|---|
Ortofon OM Pro S Turntable | The turntable itself, complete with a pre-installed OM5e cartridge. |
Cartridge Mounting Hardware | Hardware required to attach the cartridge to the turntable. |
Counterweight | Used to balance the cartridge and ensure proper tracking force. |
Power Supply | Power cable for connecting the turntable to your amplifier or preamp. |
Manual | Instruction manual for setting up and operating the turntable. |
Take your time to familiarize yourself with each component before proceeding to the installation process.
Setting Up the Turntable
Before installing the turntable, ensure that your listening room is free from vibrations. Place the turntable on a stable, vibration-free surface, such as a wooden table or a dedicated turntable stand. The following steps will guide you through the installation process:
-
Attach the cartridge mounting hardware to the turntable. This typically involves screwing the mounting block into the headshell and securing it with a nut.
-
Attach the counterweight to the cartridge. Adjust the counterweight to achieve the desired tracking force, which is usually between 1.8g and 2.2g for the OM5e cartridge.
-
Connect the power supply to the turntable. Ensure that the power cable is securely connected to both the turntable and the power outlet.
-
Mount the OM5e cartridge to the turntable. Carefully align the cartridge with the mounting block and secure it with the provided screws.
-
Install the tonearm. Ensure that the tonearm is properly aligned with the cartridge and that the arm is securely attached to the turntable.
-
Connect the turntable to your amplifier or preamp using the provided power cable.
Once you’ve completed these steps, your Ortofon OM Pro S is ready for use.
Adjusting the Tonearm
Proper tonearm alignment is crucial for optimal sound quality. Follow these steps to adjust the tonearm:
-
Adjust the VTA (Vertical Tracking Angle) by tilting the tonearm. This ensures that the stylus is at the correct angle relative to the record surface.
-
Adjust the azimuth by rotating the tonearm. This ensures that the stylus is perpendicular to the record surface.
-
Adjust the overhang by moving the cartridge closer to or further from the spindle. This ensures that the stylus is at the correct distance from the center of the record.
-
Adjust the tracking force by adjusting the counterweight. This ensures that the stylus exerts the correct amount of pressure on the record surface.
Once you’ve completed these adjustments, test the turntable by playing a record and listening for any inconsistencies in sound quality. Make further adjustments as needed.
Conclusion
Installing the Ortofon OM Pro S can be a rewarding experience, as it allows you to enjoy the